44mm Seagull Ocean Series Men's Diving Watch Automatic Mechanical Watches 200M Waterproof sapphire Luminous Clock Aircraft Carrier Design Dial 1083

Product Information

Model Number: 816.32.1083
Warranty: 2 Year
Net Weight: 200g
Packing Box: Carton
Movement: ST2500
Number of Jewels: 25
Movement Frequency: 21600
Winding Mode: Automatic Winding
Case Material: 316L Stainless Steel
Crystal Material: Synthetic Sapphire
Case Thickness: Approx. 14mm
Case Diameter: Approx. 44mm
Case Shape: Round
Lug-to-Lug: Approx. 52mm
Strap Material: 316L Stainless Steel
Clasp: Barcelet Buckle
Strap Length: Approx. 19cm
Strap Width: Approx. 22mm
Waterproof: 20 Bar
Feature: Luminous, Dive

Packing List

Sea-Gull 816.32.1083*1
Strap Cutting Tool*1
Watch Box*1

Seagull Ocean Series Diver Watch - Aircraft Carrier Edition

With the might of an aircraft carrier dominating the seas, the Seagull soars across a brushed dial.

Its powerful silhouette, full of unwavering spirit, charts a course into the deep blue — a testament to ambition that knows no bounds.

On the transparent glass case back, the declaration "My Heart Beats for China" is inscribed in a vivid crimson. This powerful statement, visible with every glance at the intricate movement within, makes one's heritage and pride an integral part of the watch's soul.

Powered by the in-house Seagull ST25 automatic mechanical movement. Engineered for reliability, it delivers a stable 10-hour power reserve through daily wear, with an ideal total capacity of 42 hours.

Its precision is anchored by 25 red jewel bearings and a high-frequency oscillation of 21,600 vibrations per hour (3Hz).

A sculpted second hand mimics the lines of a carrier deck, its tip elegantly weighted with a fighter jet profile. This architectural form embodies aviation prowess.

The polished, ridge-cut hour and minute hands are coated in blue Luminous. In darkness, they emit a vivid glow reminiscent of a jet's trail, charting a radiant course through time.

✅ Premium 316L Steel Case: Sleek brushed finish, comfortable on the skin.

✅ Polished Dive Bezel: Adds refined contrast and reliable timing under water.

✅ Secure & Ergonomic Bracelet: Steel bracelet with safety fold-over clasp, curved to fit the wrist naturally and prevent slippage.

Step 1 / Unscrew the Crown
Rotate the crown counter-clockwise (towards 6 o’clock) until it pops out slightly and unlocks.

Step 2 / Manual Winding (First Position)
In this first position, turn the crown clockwise (towards 12 o’clock) to wind the watch manually. Approx. 40 turns are recommended for a full wind.

Step 3 / Set the Time (Second Position)
Gently pull the crown out to the second position. Turn it clockwise or counter-clockwise to set the correct time.

Important Notice
After setting, always push the crown fully back and rotate it clockwise until firmly screwed down to ensure water resistance.

Unidirectional Diving Bezel Instructions
1. Set Your Dive Time
To time a 30-minute dive: Rotate the bezel so that its triangle marker (▼) aligns with the minute hand at the start of your dive. For example, if the minute hand is at the 12 o'clock position (0 minutes), turn the bezel until the triangle marker points to the 8 o'clock position on the dial (marking 30 minutes).

2. Monitor Elapsed Time
Once set, the minute hand will move relative to the bezel's scale. Your dive is complete when the minute hand reaches the bezel's ▼ marker.

3. Reset After Use
After timing, manually rotate the bezel back to its default position, with the ▼marker realigned precisely at 12 o'clock.

⚠️ Safety Notice

This bezel rotates only counter-clockwise. This design prevents accidental extension of your measured dive time, adding a critical safety margin.

Always ensure the bezel is securely reset to the 12 o'clock position before your next dive or timing operation.